Record Cable TV With A VCR
The process to record cable tv with a VCR using an antenna is more or less the same as the HDTV or high definition television using an analogue television. This similarity in the process is due to the presence of the TV tuner in the VCR that initiates the recording process. If you want to know how to record tv with a VCR? Then you should be aware that this process requires the use of a DTV converter box. On the other hand, in the case of analogue television sets, you don't need to use a DTV converter set to record the broadcast as the VCR comes with an in-built analogue TV recorder.
If you are someone who wishes to do the same then look no further as we will present you with the best way to record cable tv using a VCR.
Part 1 What Would You Require to Record Cable TV on VCR?
You will need the below-mentioned items to record cable tv on VCR.
- Two-way splitter
- DTV converter box
- Coaxial cable
- HD TV
- Yellow, red and white cables or RCA audio and video cables
Part 2 How To Get Things Connected?
You can follow the below-given instruction to make the connection easily.
- Connect the two-way splitter input with the antenna output using a coaxial cable. Since there is just one coaxial input on the splitter, therefore, ensure that you are not confused with the two outputs.
- Now, connect the remaining two coaxial cables to the two way splitter output. You don't need to be worried about attaching the other ends of the cable until we get to step 4.
- After this, you need to connect one coaxial cable from the two-way splitter to the coaxial cable output on the DTV converter box. While the other coaxial cable needs to be connected from the splitter to antenna input on the HDTV.
- Now, attach one end of the audio cords and RCA video with the matching outputs based on the colours at the backside of the DTV converter box. After doing so, you need to attach the other end of the same RCA cables to the inputs with the same colour on the backside of the VCR.
- Lastly, using the other RCA video and audio cable, connect one side of the same coloured output to the VCR. then, use the other end of the same RCA audio and video cables to connect with the same coloured inputs at the backside of the HDTV.
Part 3 How to Watch One Channel While Recording Another?
Things you will need:
- Analogue TV
- Coaxial wire
- 4 additional lengths of coaxial wire
- A/V cables set
- Two-way splitter
- Two converter boxes that include coaxial wires, a set of AV cables, remote control
Before starting this process, ensure to switch off the power from the TV and VCR.
Step 1: Separate the current coaxial antenna from the VCR or antenna in the RF port.
Step 2: Now, detach the coaxial wire no 2 from the VCR while plugging the other side of wire no 2 into the TV.
Step 3: After this, connect the current coaxial antenna wire into the in-port of the two-way splitter.
Step 4: Now, connect the loose end or wire no 2 to the Out to TV (RF)” port in the converter box A.
Step 5: Now, attach one side of the coaxial wire no 3 into any of the outports of the two way splitter. Then, attach the other end to the antenna in (RF)” port on converter box A.
Step 6: After this, you need to attach one end of the coaxial wire no 4 into the other out port of the splitter while plugging the other end into the antenna in (RF)” port of converted box B.
Step 7: In this step, you need to connect one end of the coaxial wire no 5 with the Out to TV (RF)” port of the converter box B. whereas the other end will be plugged into the antenna in (RF)” port of the VCR.
Step 8: Now, use the A/V cables and connect their one end to the A/V Out ports in your VCR. You need to match the colours of the plugs to the ports so that they are connected correctly. After this, attach the other end of the cables into the A/V ports of your TV by matching the colours. In case there is no red port in your TV, leave the red cable unplugged.
Step 9: Attach the power cords to the converter boxes and VCR and TV to the power outlets. Followed by turning them all on. Now, tune your TV to channel no 3 or 4 in order to set the converter box A. Then, use the remote control that came with converter box A and follow the steps shown on-screen to scan the available DTV channels.
Step 10: At last, you need to set the “Audio/Video In'' while tuning the VCR to either channel 3 or 4 to set the converter box B. Now, using the remote that you got with converter box B, following the on-screen instructions to scan for the availability of DTV channels.
If your question is how can you record cable tv with a VCR? Then we got you covered with the solutions given above. Establishing a connection to record cable tv with VCR might seem challenging but if you follow the above-given steps, this task is pretty easy. We hope this post will be helpful enough to easily let you record your favourite channel on cable TV with a VCR.